Back To Search Results

FRAM Extra Guard® Oil Filter

SKU
PH12747
More Information
Height (Inch) 4.36
Anti-Drain Back Valve Yes
Bypass Relief Valve Yes
Gasket Type Base
Attachment Type Spin-On
Bypass Relief Valve Setting (Pounds per Square Inch) 18-24
Filter Media Material Cellulose/Synthetic Blend
Inlet Type Threaded
Inside Thread Diameter (Millimeter) M22x1.5
Outer Diameter Bottom (Inch) 3.684
Thread Size Metric
Torque Nut No
More Information
Where To Shop
Search
  • Description

    FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Equipped with SureGrip® technology, FRAM Extra Guard® oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 10,000 miles (16,000 kilometers).

    • Proven protection for up to 10,000 miles (16,000 kilometers)
    • Engineered for use with synthetic or conventional motor oils
    • SureGrip® technology for easy install and removal
    • Filter media is a blend of fiber and resin that captures 95% of the dirt particles
    • Silicone anti-drain back valve helps ensure safe engine start up

    *FRAM Group testing of average filter efficiency of PH8A, PH3387A and PH4967 under ISO 4548-12 for particles greater than 20 microns.

    **Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.

    ?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    24-20 CHEVROLET SILVERADO 2500 HD V8-6.6L
    24-20 CHEVROLET SILVERADO 3500 HD V8-6.6L
    22-20 CHEVROLET SILVERADO 4500 HD V8-6.6L
    22-19 CHEVROLET SILVERADO 5500 HD V8-6.6L
    22-19 CHEVROLET SILVERADO 6500 HD V8-6.6L
    25-20 GMC SIERRA 2500 HD V8-6.6L
    24-20 GMC SIERRA 3500 HD V8-6.6L
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    Baldwin B40150
    Carquest Premium Filters 95324
    General Motors 12684038
    LUBER-FINER PH26
    Mobil 1 M1-210A
    Mobil 1 M1-201A
    NAPA Gold Filters 100454
    Premium Guard PG99522EX
    Premium Guard Extended Life PG99522EX
    PurolatorONE PL11513
    STP S45019XL
    STP S45019
    STP SL45019
    STP Filters S45019
    STP Filters SL45019
    STP Filters S45019XL
    Valvoline VO-203
    Wix WL10454
  • Installation
    1. Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot.
    2. Place a drain pan under the oil filter and unscrew oil filter.
    3. Clean mounting base making sure the O-ring from the old filter is not stuck to the filter mount.
    4. Apply film of clean oil to filter gasket. Do not use grease.
    5. Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers.
    6. Check owner’s manual for correct oil specification viscosity and amount.
    7. Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
    8. Shut off engine and recheck oil level after 5 minutes and top off as necessary.