Toggle Nav
PARTS SEARCH
  • Compare Products
Menu
Account
Settings
Language
English
Back To Search Results

FRAM Extra Guard® Oil Filter

Add to Compare
SKU
CH9994
More Information
Height (Inch) 6.024
Outer Diameter Top (Inch) 2.579
Anti-Drain Back Valve No
Bypass Relief Valve No
Gasket Type Cover
Filter Media Material Cellulose/Synthetic Blend
Inside Diameter Bottom (Inch) 1.291
O-Ring Inside Diameter (Inch) 2.813
O-Ring Outside Diameter (Inch) 2.952
O-Ring Thickness (Inch) 0.139
O-Rings Included Yes
Outer Diameter Bottom (Inch) 2.579
Top Inside Diameter (Inch) 1.291
Torque Nut No
Washer Inside Diameter (Inch) 0.472
Washer Outside Diameter (Inch) 0.669
Washer Thickness (Inch) 0.059
More Information
Where To Shop
Search
  • Description

    FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Engineered for conventional and synthetic motor oil, Extra Guard offers proven engine protection for up to 10,000 miles (16,000 kilometers).

    • Proven protection for up to 10,000 miles (16,000 kilometers)
    • Engineered for use with synthetic or conventional motor oils
    • Filter media is a blend of fiber and resin that captures 95%?of the dirt particles
    • The perfect balance of dirt-trapping efficiency and dirt-holding capacity
    • Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today’s engines

    *FRAM Group testing of average filter efficiency of PH8A, PH3387A and PH4967 under ISO 4548-12 for particles greater than 20 microns.

    **Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.

    ?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    11-09 BMW 335D L6-3.0L
    13-09 BMW X5 L6-3.0L
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    Beck/Arnley 041-0836
    BMW 11 42 7 788 461
    BMW 11 42 7 788 454
    BMW 11 42 7 788 460
    Carquest 84560
    Carquest Premium Filters 84560
    Champ P983
    FERGUSON G7560
    FVP G7560
    GK Industries EF35909
    Hastings LF668
    Hengst E28H01 D26
    LUBER-FINER P983
    MAHLE OX177/3D
    MAHLE OX177/3DECO
    Mann-Filter HU721/4X
    Mighty Distributing System M983
    Mobil P983
    NAPA 7560
    PUREPRO PL5909
    Purolator L35909
    Service Champ CF5909
    STP P983
    STP Filters P983
    Valvoline VO-140
    Wix 57560
  • Installation
    1. Remove drain plug from housing cap if present and allow oil to drain from cap. Remove housing cap old gaskets/O-Rings and filter element. Discard the used filter element and gaskets/O-Rings in the proper manner.
    2. Clean filter housing components and apply a light coating of clean engine oil to the new provided gaskets/O-Rings. Install being careful to avoid damage to the gaskets/O-Rings. Avoid twisting of the gaskets/O-Rings.
    3. Install new filter element into the housing cap. Reinstall the housing cap and tighten to the proper installation torque as listed on the housing cap or in the service manual. Reinstall the housing cap drain if present to the proper installation torque.