Back To Search Results
FRAM Extra Guard® Oil Filter
SKU
CH9955
| Height (Inch) | 4.060 |
|---|---|
| Outer Diameter Top (Inch) | 2.870 |
| Anti-Drain Back Valve | No |
| Bypass Relief Valve | No |
| Filter Media Material | Cellulose/Synthetic Blend |
| Inside Diameter Bottom (Inch) | 1.260 |
| O-Ring (1) Inside Diameter (Inch) | 0.240 |
| O-Ring (1) Outside Diameter (Inch) | 1.220 |
| O-Ring (1) Thickness (Inch) | 0.090 |
| O-Ring Inside Diameter (Inch) | 3.230 |
| O-Ring Outside Diameter (Inch) | 3.500 |
| O-Ring Thickness (Inch) | 0.140 |
| O-Rings Included | Yes |
| Outer Diameter Bottom (Inch) | 2.870 |
| Top Inside Diameter (Inch) | 0.360 |
| Torque Nut | No |
| Washer Inside Diameter (Inch) | 0.720 |
| Washer Outside Diameter (Inch) | 0.850 |
| Washer Thickness (Inch) | 0.060 |
Where To Shop
Search
Search
- Description
FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Engineered for conventional and synthetic motor oil, Extra Guard offers proven engine protection for up to 10,000 miles (16,000 kilometers).
- Proven protection for up to 10,000 miles (16,000 kilometers)
- Engineered for use with synthetic or conventional motor oils
- Filter media is a blend of fiber and resin that captures 95%?of the dirt particles
- The perfect balance of dirt-trapping efficiency and dirt-holding capacity
- Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today’s engines
*FRAM Group testing of average filter efficiency of PH8A, PH3387A and PH4967 under ISO 4548-12 for particles greater than 20 microns.
**Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.
?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 05-04 BMW 545I V8-4.4L 05-04 BMW 645CI V8-4.4L 05-02 BMW 745I V8-4.4L 05-02 BMW 745LI V8-4.4L 2004 BMW 760I V12-6.0L 2004 BMW 760LI V12-6.0L 08-07 BMW ALPINA B7 V8-4.4L 06-04 BMW X5 V8-4.4L 06-04 BMW X5 V8-4.8L - Comparison
COMPETITOR NAME COMPETITOR PART # BMW 11 42 7 511 161 BMW 11 42 7 506 677 BMW 11 42 7 527 957 Bosch 72224WS Carquest 84171 Carquest Premium Filters 84171 Champ P929 FERGUSON G7171 FVP G7171 Group 7 V5511 Hastings LF595 Hengst E203HD67 Hengst E203H Hengst E203H D67 Kralinator L7171 LUBER-FINER P929 MAHLE OX367DECO Mann-Filter HU715/5X NAPA 7171 Parts Master 67171 Pentius PCB9955 Performax PO-158 Premium Guard PG5511 Promotive PH5511 Pronto PO-5511 Purolator L25511 Service Champ CF5511 STP S9955 STP Filters S9955 Valvoline VO-128 Wix 57171 - Installation
- Remove drain plug from housing cap if present and allow oil to drain from cap. Remove housing cap old gaskets/O-Rings and filter element. Discard the used filter element and gaskets/O-Rings in the proper manner.
- Clean filter housing components and apply a light coating of clean engine oil to the new provided gaskets/O-Rings. Install being careful to avoid damage to the gaskets/O-Rings. Avoid twisting of the gaskets/O-Rings.
- Install new filter element into the housing cap. Reinstall the housing cap and tighten to the proper installation torque as listed on the housing cap or in the service manual. Reinstall the housing cap drain if present to the proper installation torque.