Back To Search Results
FRAM Extra Guard® Oil Filter
SKU
CH9690
| Height (Inch) | 5.644 |
|---|---|
| Outer Diameter Top (Inch) | 2.867 |
| Anti-Drain Back Valve | No |
| Bypass Relief Valve | No |
| Filter Media Material | Cellulose/Synthetic Blend |
| Inside Diameter Bottom (Inch) | 1.313 |
| O-Ring Inside Diameter (Inch) | 3.441 |
| O-Ring Outside Diameter (Inch) | 3.585 |
| O-Ring Thickness (Inch) | 0.144 |
| O-Rings Included | Yes |
| Outer Diameter Bottom (Inch) | 2.867 |
| Top Inside Diameter (Inch) | 0.360 |
| Torque Nut | No |
| Washer Inside Diameter (Inch) | 1.261 |
| Washer Outside Diameter (Inch) | 1.810 |
| Washer Thickness (Inch) | 0.080 |
Where To Shop
Search
Search
- Description
FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Engineered for conventional and synthetic motor oil, Extra Guard offers proven engine protection for up to 10,000 miles (16,000 kilometers).
- Proven protection for up to 10,000 miles (16,000 kilometers)
- Engineered for use with synthetic or conventional motor oils
- Filter media is a blend of fiber and resin that captures 95%?of the dirt particles
- The perfect balance of dirt-trapping efficiency and dirt-holding capacity
- Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today’s engines
*FRAM Group testing of average filter efficiency of PH8A, PH3387A and PH4967 under ISO 4548-12 for particles greater than 20 microns.
**Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.
?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 06-05 AUDI A6 QUATTRO V8-4.2L 06-04 AUDI A8 QUATTRO V8-4.2L 2005 AUDI A8 QUATTRO W12-6.0L 05-04 AUDI ALLROAD QUATTRO V8-4.2L 2007 AUDI Q7 V8-4.2L 09-04 AUDI S4 V8-4.2L 06-04 VOLKSWAGEN PHAETON V8-4.2L 2005 VOLKSWAGEN PHAETON W12-6.0L - Comparison
COMPETITOR NAME COMPETITOR PART # Carquest Premium Filters 84329 Champ P961 FERGUSON G7329 FVP G7329 Hastings LF566 Hengst E355H01 D58 LUBER-FINER P961 MAHLE OX358DECO Mann-Filter HU835/1X NAPA 7329 Parts Master 67330 Pentius PCB9690 Premium Guard PG5579 Purolator L45579 STP P961 STP Filters P961XL STP Filters P961 Valvoline VO-94 Volkswagen 079 198 405 Volkswagen 079 115 561B Volkswagen 07C 115 562A Volkswagen 079 198 405A Wix 57329 - Installation
- Remove drain plug from housing cap if present and allow oil to drain from cap. Remove housing cap old gaskets/O-Rings and filter element. Discard the used filter element and gaskets/O-Rings in the proper manner.
- Clean filter housing components and apply a light coating of clean engine oil to the new provided gaskets/O-Rings. Install being careful to avoid damage to the gaskets/O-Rings. Avoid twisting of the gaskets/O-Rings.
- Install new filter element into the housing cap. Reinstall the housing cap and tighten to the proper installation torque as listed on the housing cap or in the service manual. Reinstall the housing cap drain if present to the proper installation torque.