Back To Search Results
FRAM Oil Filter
SKU
CH6070
| Height (Inch) | 2.218 |
|---|---|
| Anti-Drain Back Valve | No |
| Bypass Relief Valve | No |
| Bottom Inside Diameter (Inch) | 0.531 |
| Filter Media Material | Cellulose/Synthetic Blend |
| O-Ring (1) Inside Diameter (Inch) | 2.156 |
| O-Ring (1) Outside Diameter (Inch) | 2.406 |
| O-Ring (1) Thickness (Inch) | 0.125 |
| O-Ring Inside Diameter (Inch) | 2.500 |
| O-Ring Outside Diameter (Inch) | 2.688 |
| O-Ring Thickness (Inch) | 0.094 |
| O-Rings Included | Yes |
| Outer Diameter Bottom (Inch) | 2.188 |
| Top Inside Diameter (Inch) | 0.531 |
| Torque Nut | No |
Where To Shop
Search
Search
- Description
FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Engineered for conventional and synthetic motor oil, Extra Guard offers proven engine protection for up to 10,000 miles (16,000 kilometers).
- Proven protection for up to 10,000 miles (16,000 kilometers)
- Engineered for use with synthetic or conventional motor oils
- Filter media is a blend of fiber and resin that captures 95%?of the dirt particles
- The perfect balance of dirt-trapping efficiency and dirt-holding capacity
- Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today’s engines
*FRAM Group testing of average filter efficiency of PH8A, PH3387A and PH4967 under ISO 4548-12 for particles greater than 20 microns.
**Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.
?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 03-01 KAWASAKI KEF300 LAKOTA SPORT All 00-95 KAWASAKI KEF300 LAKOTA UTILITY All 2004 KAWASAKI KFX250 MOJAVE All 84-78 KAWASAKI KL250 All 86-84 KAWASAKI KL600 All 91-90 KAWASAKI KL650B TENGAI All 02-88 KAWASAKI KLF220 BAYOU All 11-03 KAWASAKI KLF250 BAYOU All 04-86 KAWASAKI KLF300 BAYOU 2X4 All 04-89 KAWASAKI KLF300 BAYOU 4X4 All 05-85 KAWASAKI KLR250 All 18-87 KAWASAKI KLR650 All 25-22 KAWASAKI KLR650 All 25-22 KAWASAKI KLR650 ABS All 23-22 KAWASAKI KLR650 ADVENTURE All 25-22 KAWASAKI KLR650 ADVENTURE ABS All 18-16 KAWASAKI KLR650 CAMO All 2014 KAWASAKI KLR650 NEW EDITION All 2022 KAWASAKI KLR650 TRAVELER All 23-22 KAWASAKI KLR650 TRAVELER ABS All 25-23 KAWASAKI KLR650S All 2023 KAWASAKI KLR650S ABS All 2025 KAWASAKI KLR650S ABS All 84-81 KAWASAKI KLT200 All 84-82 KAWASAKI KLT250 All 80-79 KAWASAKI KLX250 All 96-93 KAWASAKI KLX650 All 96-93 KAWASAKI KLX650R All 03-87 KAWASAKI KSF250 MOJAVE All 79-78 KAWASAKI KZ200 All 83-80 KAWASAKI KZ250 All - Comparison
COMPETITOR NAME COMPETITOR PART # Big A 96950 Big A 96951 Carquest 89951 Champ P7027 Hastings LF582 Hastings LF590 HiFlo HF123 K&N KN-123 Kawasaki 16099-004 LUBER-FINER P7027 MAHLE OX796 NAPA 4950 NAPA 4951 Premium Guard MG123 Purolator ML16823 Purolator ML16824 STP P7027 Warner P7027 Wix 24951 - Installation
- Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot.
- Place a drain pan under the oil filter and unscrew oil filter.
- Clean mounting base making sure the O-ring from the old filter is not stuck to the filter mount.
- Apply film of clean oil to filter gasket. Do not use grease.
- Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers.
- Check owner’s manual for correct oil specification viscosity and amount.
- Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
- Shut off engine and recheck oil level after 5 minutes and top off as necessary.