Back To Search Results
FRAM Oil Filter
SKU
CH6009
| Height (Inch) | 2.218 |
|---|---|
| Outer Diameter Top (Inch) | 3.031 |
| Anti-Drain Back Valve | No |
| Bypass Relief Valve | No |
| Filter Media Material | Cellulose/Synthetic Blend |
| Inside Diameter Bottom (Inch) | 0.765 |
| O-Ring (1) Inside Diameter (Inch) | 0.609 |
| O-Ring (1) Outside Diameter (Inch) | 0.813 |
| O-Ring (1) Thickness (Inch) | 0.109 |
| O-Ring Inside Diameter (Inch) | 3.500 |
| O-Ring Outside Diameter (Inch) | 3.859 |
| O-Ring Thickness (Inch) | 0.172 |
| O-Rings Included | Yes |
| Outer Diameter Bottom (Inch) | 3.031 |
| Top Inside Diameter (Inch) | 0.765 |
| Torque Nut | No |
Where To Shop
Search
Search
- Description
FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Engineered for conventional and synthetic motor oil, Extra Guard offers proven engine protection for up to 10,000 miles (16,000 kilometers).
- Proven protection for up to 10,000 miles (16,000 kilometers)
- Engineered for use with synthetic or conventional motor oils
- Filter media is a blend of fiber and resin that captures 95%?of the dirt particles
- The perfect balance of dirt-trapping efficiency and dirt-holding capacity
- Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today’s engines
*FRAM Group testing of average filter efficiency of PH8A, PH3387A and PH4967 under ISO 4548-12 for particles greater than 20 microns.
**Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.
?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 1983 HONDA CB1000C CUSTOM All 1983 HONDA CB1100F All 77-75 HONDA CB400F SUPER SPORT All 77-76 HONDA CB550F SUPER SPORT All 78-76 HONDA CB550K All 1983 HONDA CB550SC NIGHTHAWK All 82-79 HONDA CB650 All 81-80 HONDA CB650C CUSTOM All 85-82 HONDA CB650SC NIGHTHAWK All 78-76 HONDA CB750A AUTOMATIC All 82-80 HONDA CB750C CUSTOM All 82-76 HONDA CB750F SUPER SPORT All 82-69 HONDA CB750K All 1979 HONDA CB750L All 83-82 HONDA CB750SC NIGHTHAWK All 82-80 HONDA CB900C CUSTOM All 82-81 HONDA CB900F SUPER SPORT All 82-79 HONDA CBX All 79-75 HONDA GL1000 GOLD WING All 83-80 HONDA GL1100 GOLD WING All 83-82 HONDA GL1100A GOLD WING ASPENCADE All 83-80 HONDA GL1100I GOLD WING INTERSTATE All 1984 HONDA GL1200 GOLD WING All 87-84 HONDA GL1200A GOLD WING ASPENCADE All 87-84 HONDA GL1200I GOLD WING INTERSTATE All 1985 HONDA GL1200L GOLD WING LIMITED All 1986 HONDA GL1200SEI GOLD WING ASPENCADE All - Comparison
COMPETITOR NAME COMPETITOR PART # ACDelco PF2170 Auto-Tune E5202 Baldwin P148 Big A 92216 Big A 96940 Carquest 89940 Carquest 85216 Cenex CO3000 Champ P7009 Champ P300 Deutsch D4022 Ducati 252.004.0799 Emgo 10-37500 Emgo 10-20300 Grand Prix P300 Hastings LF571 Hastings LF603 Honda 15412-300-024 Honda 15410-422-000 Honda 15410-426-000 Honda 15410-426-010 Honda 15412-300-325 LUBER-FINER P300 LUBER-FINER P7009 MAHLE OX61D Mobil 1 M1MC-171 NAPA 1216 NAPA 4940 Purolator ML16809 STP P7009 Warner P7009 Wix 51216 Wix 24940 - Installation
- Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot.
- Place a drain pan under the oil filter and unscrew oil filter.
- Clean mounting base making sure the O-ring from the old filter is not stuck to the filter mount.
- Apply film of clean oil to filter gasket. Do not use grease.
- Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers.
- Check owner’s manual for correct oil specification viscosity and amount.
- Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
- Shut off engine and recheck oil level after 5 minutes and top off as necessary.