Toggle Nav
PARTS SEARCH
  • Compare Products
Menu
Account
Settings
Language
English
Back To Search Results

FRAM Oil Filter

Add to Compare
SKU
CH6006
More Information
Height (Inch) 2.234
Outer Diameter Top (Inch) 3.031
Anti-Drain Back Valve No
Bypass Relief Valve No
Filter Media Material Cellulose/Synthetic Blend
Inside Diameter Bottom (Inch) 0.765
O-Ring (1) Inside Diameter (Inch) 0.609
O-Ring (1) Outside Diameter (Inch) 0.813
O-Ring (1) Thickness (Inch) 0.109
O-Ring Inside Diameter (Inch) 3.453
O-Ring Outside Diameter (Inch) 3.781
O-Ring Thickness (Inch) 0.156
O-Rings Included Yes
Outer Diameter Bottom (Inch) 3.031
Top Inside Diameter (Inch) 0.765
Torque Nut No
More Information
Where To Shop
Search
  • Description

    FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Engineered for conventional and synthetic motor oil, Extra Guard offers proven engine protection for up to 10,000 miles (16,000 kilometers).

    • Proven protection for up to 10,000 miles (16,000 kilometers)
    • Engineered for use with synthetic or conventional motor oils
    • Filter media is a blend of fiber and resin that captures 95%?of the dirt particles
    • The perfect balance of dirt-trapping efficiency and dirt-holding capacity
    • Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today’s engines

    *FRAM Group testing of average filter efficiency of PH8A, PH3387A and PH4967 under ISO 4548-12 for particles greater than 20 microns.

    **Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.

    ?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    85-84 YAMAHA FJ1100 All
    93-86 YAMAHA FJ1200 All
    1987 YAMAHA FZ700 All
    90-87 YAMAHA FZR1000 All
    88-87 YAMAHA FZR750R All
    87-86 YAMAHA FZX700 FAZER All
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    ACDelco PF2122
    Big A 96937
    Carquest 89937
    Champ P7006
    Emgo 10-28420
    Hastings LF569
    K&N KN-401
    LUBER-FINER P7006
    MAHLE OX61D
    NAPA 4937
    Purolator ML16806
    STP P7006
    Warner P7006
    Wix 24937
    Yamaha 36Y-13441-00
  • Installation
    1. Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot.
    2. Place a drain pan under the oil filter and unscrew oil filter.
    3. Clean mounting base making sure the O-ring from the old filter is not stuck to the filter mount.
    4. Apply film of clean oil to filter gasket. Do not use grease.
    5. Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers.
    6. Check owner’s manual for correct oil specification viscosity and amount.
    7. Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
    8. Shut off engine and recheck oil level after 5 minutes and top off as necessary.