Back To Search Results

FRAM Oil Filter

SKU
CH6004
More Information
Height (Inch) 2.234
Outer Diameter Top (Inch) 2.172
Anti-Drain Back Valve No
Bypass Relief Valve Yes
Bypass Relief Valve Setting (Pounds per Square Inch) 8-10
Filter Media Material Cellulose/Synthetic Blend
Inside Diameter Bottom (Inch) 0.765
O-Ring (1) Inside Diameter (Inch) 2.094
O-Ring (1) Outside Diameter (Inch) 2.296
O-Ring (1) Thickness (Inch) 0.094
O-Ring (2) Inside Diameter (Inch) 0.281
O-Ring (2) Outside Diameter (Inch) 0.469
O-Ring (2) Thickness (Inch) 0.094
O-Ring Inside Diameter (Inch) 2.422
O-Ring Outside Diameter (Inch) 2.531
O-Ring Thickness (Inch) 0.078
O-Rings Included Yes
Outer Diameter Bottom (Inch) 2.172
Top Inside Diameter (Inch) 0.765
Torque Nut No
More Information
Where To Shop
Search
  • Description

    FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Engineered for conventional and synthetic motor oil, Extra Guard offers proven engine protection for up to 10,000 miles (16,000 kilometers).

    • Proven protection for up to 10,000 miles (16,000 kilometers)
    • Engineered for use with synthetic or conventional motor oils
    • Filter media is a blend of fiber and resin that captures 95%?of the dirt particles
    • The perfect balance of dirt-trapping efficiency and dirt-holding capacity
    • Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today’s engines

    *FRAM Group testing of average filter efficiency of PH8A, PH3387A and PH4967 under ISO 4548-12 for particles greater than 20 microns.

    **Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.

    ?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    2016 YAMAHA SR400 All
    85-84 YAMAHA XV1000 VIRAGO All
    99-86 YAMAHA XV1100 VIRAGO All
    83-81 YAMAHA XV750 VIRAGO All
    97-88 YAMAHA XV750 VIRAGO All
    83-82 YAMAHA XV920 VIRAGO All
    82-81 YAMAHA XV920R SECA All
    09-99 YAMAHA XVS1100 V STAR 1100 CUSTOM All
    11-10 YAMAHA XVS650 V STAR CUSTOM All
    16-13 YAMAHA XVS650 V STAR CUSTOM All
    2010 YAMAHA XVS650A V STAR CLASSIC All
    2010 YAMAHA XVS650AT V STAR SILVERADO All
    19-15 YAMAHA YFM700 RAPTOR All
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    Aprilia AP8520017
    Big A 96935
    Big A 96936
    Carquest 89935
    Carquest 89936
    Champ P7004
    Emgo 10-79100
    Emgo 10-29100
    Hastings LF583
    HiFlo HF145
    K&N KN-145
    LUBER-FINER P7004
    Master Parts P-305
    NAPA 4935
    NAPA 4936
    Purolator ML16804
    Purolator ML16805
    STP P7004
    Warner P7004
    Wix 24935
    Yamaha 4X7-13440-90-00
    Yamaha 4X7-13440-01
    Yamaha 2H0-13440-90
    Yamaha 4X7-13440-01-00
    Yamaha 4X7-13440-90
  • Installation
    1. Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot.
    2. Place a drain pan under the oil filter and unscrew oil filter.
    3. Clean mounting base making sure the O-ring from the old filter is not stuck to the filter mount.
    4. Apply film of clean oil to filter gasket. Do not use grease.
    5. Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers.
    6. Check owner’s manual for correct oil specification viscosity and amount.
    7. Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
    8. Shut off engine and recheck oil level after 5 minutes and top off as necessary.