Back To Search Results

FRAM Oil Filter

SKU
CH6003
More Information
Height (Inch) 1.484
Outer Diameter Top (Inch) 3.031
Anti-Drain Back Valve No
Bypass Relief Valve No
Filter Media Material Cellulose/Synthetic Blend
Inside Diameter Bottom (Inch) 0.765
O-Ring (1) Inside Diameter (Inch) 0.609
O-Ring (1) Outside Diameter (Inch) 0.813
O-Ring (1) Thickness (Inch) 0.109
O-Ring Inside Diameter (Inch) 3.453
O-Ring Outside Diameter (Inch) 3.781
O-Ring Thickness (Inch) 0.156
O-Rings Included Yes
Outer Diameter Bottom (Inch) 3.031
Top Inside Diameter (Inch) 0.765
Torque Nut No
More Information
Where To Shop
Search
  • Description

    FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Engineered for conventional and synthetic motor oil, Extra Guard offers proven engine protection for up to 10,000 miles (16,000 kilometers).

    • Proven protection for up to 10,000 miles (16,000 kilometers)
    • Engineered for use with synthetic or conventional motor oils
    • Filter media is a blend of fiber and resin that captures 95%?of the dirt particles
    • The perfect balance of dirt-trapping efficiency and dirt-holding capacity
    • Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today’s engines

    *FRAM Group testing of average filter efficiency of PH8A, PH3387A and PH4967 under ISO 4548-12 for particles greater than 20 microns.

    **Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.

    ?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    85-84 YAMAHA FJ600 All
    88-86 YAMAHA FZ600 All
    90-88 YAMAHA FZR400 All
    83-81 YAMAHA XJ550 MAXIM All
    83-81 YAMAHA XJ550R SECA All
    83-80 YAMAHA XJ650 MAXIM All
    83-81 YAMAHA XJ650L TURBO SECA All
    1982 YAMAHA XJ650R SECA All
    1985 YAMAHA XJ700 MAXIM All
    83-82 YAMAHA XJ750 MAXIM All
    1983 YAMAHA XJ750M MID-MAX All
    83-81 YAMAHA XJ750R SECA All
    1983 YAMAHA XJ900 SECA All
    77-76 YAMAHA XS360 All
    81-77 YAMAHA XS400 All
    83-82 YAMAHA XS400 MAXIM All
    83-82 YAMAHA XS400R SECA All
    90-86 YAMAHA YX600 RADIAN All
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    ACDelco PF1712
    Auto-Tune E5204
    Big A 92218
    Big A 96933
    Big A 96934
    Carquest 89934
    Carquest 85218
    Champ P7003
    Dorcy 21-8055
    Emgo 10-28400
    Hastings LF573
    K&N KN-144
    LUBER-FINER P7003
    NAPA 4934
    NAPA 1218
    Purolator ML16803
    STP P7003
    Warner P7003
    Wix 51218
    Wix 24934
    Yamaha 1L9-13441-11
    Yamaha 1L9-13440-90
    Yamaha 1L9-13440-91
  • Installation
    1. Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot.
    2. Place a drain pan under the oil filter and unscrew oil filter.
    3. Clean mounting base making sure the O-ring from the old filter is not stuck to the filter mount.
    4. Apply film of clean oil to filter gasket. Do not use grease.
    5. Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers.
    6. Check owner’s manual for correct oil specification viscosity and amount.
    7. Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
    8. Shut off engine and recheck oil level after 5 minutes and top off as necessary.