Toggle Nav
PARTS SEARCH
  • Compare Products
Menu
Account
Settings
Language
English
Back To Search Results

FRAM Oil Filter

Add to Compare
SKU
CH6002
More Information
Height (Inch) 1.593
Outer Diameter Top (Inch) 3.953
Anti-Drain Back Valve No
Bypass Relief Valve No
Filter Media Material Cellulose/Synthetic Blend
Inside Diameter Bottom (Inch) 0.765
O-Ring (1) Inside Diameter (Inch) 0.609
O-Ring (1) Outside Diameter (Inch) 0.813
O-Ring (1) Thickness (Inch) 0.109
O-Ring Inside Diameter (Inch) 4.625
O-Ring Outside Diameter (Inch) 4.875
O-Ring Thickness (Inch) 0.125
O-Rings Included Yes
Outer Diameter Bottom (Inch) 3.953
Top Inside Diameter (Inch) 0.765
Torque Nut No
More Information
Where To Shop
Search
  • Description

    FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Engineered for conventional and synthetic motor oil, Extra Guard offers proven engine protection for up to 10,000 miles (16,000 kilometers).

    • Proven protection for up to 10,000 miles (16,000 kilometers)
    • Engineered for use with synthetic or conventional motor oils
    • Filter media is a blend of fiber and resin that captures 95%?of the dirt particles
    • The perfect balance of dirt-trapping efficiency and dirt-holding capacity
    • Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today’s engines

    *FRAM Group testing of average filter efficiency of PH8A, PH3387A and PH4967 under ISO 4548-12 for particles greater than 20 microns.

    **Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.

    ?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    86-85 YAMAHA VMX1200 V-MAX All
    95-88 YAMAHA VMX1200 V-MAX All
    1982 YAMAHA XJ1100 MAXIM All
    81-78 YAMAHA XS1100 All
    79-77 YAMAHA XS750 All
    81-80 YAMAHA XS850 All
    84-83 YAMAHA XVZ1200 VENTURE All
    85-83 YAMAHA XVZ1200D VENTURE ROYALE All
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    Auto-Tune E5203
    Big A 92219
    Big A 96931
    Carquest 85219
    Carquest 89931
    Carquest 89933
    Champ P7002
    Champ P305
    Dorcy 21-8050
    Emgo 10-28500
    Hastings LF572
    K&N KN-146
    LUBER-FINER P7002
    NAPA 4933
    NAPA 4931
    NAPA 1219
    Purolator ML26802
    Warner P7002
    Wix 24931
    Wix 24933
    Wix 51219
    Yamaha 1J7-13440-91
    Yamaha 1J7-13441-10
  • Installation
    1. Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot.
    2. Place a drain pan under the oil filter and unscrew oil filter.
    3. Clean mounting base making sure the O-ring from the old filter is not stuck to the filter mount.
    4. Apply film of clean oil to filter gasket. Do not use grease.
    5. Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers.
    6. Check owner’s manual for correct oil specification viscosity and amount.
    7. Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
    8. Shut off engine and recheck oil level after 5 minutes and top off as necessary.