Back To Search Results
FRAM Extra Guard® Oil Filter
SKU
CH4797
| Height (Inch) | 4.125 |
|---|---|
| Outer Diameter Top (Inch) | 2.328 |
| Anti-Drain Back Valve | No |
| Bypass Relief Valve | No |
| Filter Media Material | Cellulose |
| Inside Diameter Bottom (Inch) | 0.750 |
| O-Ring Inside Diameter (Inch) | 2.375 |
| O-Ring Outside Diameter (Inch) | 2.625 |
| O-Ring Thickness (Inch) | 0.188 |
| O-Rings Included | Yes |
| Outer Diameter Bottom (Inch) | 2.328 |
| Top Inside Diameter (Inch) | 0.375 |
| Torque Nut | No |
Where To Shop
Search
Search
- Description
FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Engineered for conventional and synthetic motor oil, Extra Guard offers proven engine protection for up to 10,000 miles (16,000 kilometers).
- Proven protection for up to 10,000 miles (16,000 kilometers)
- Engineered for use with synthetic or conventional motor oils
- Filter media is a blend of fiber and resin that captures 95%?of the dirt particles
- The perfect balance of dirt-trapping efficiency and dirt-holding capacity
- Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today’s engines
*FRAM Group testing of average filter efficiency of PH8A, PH3387A and PH4967 under ISO 4548-12 for particles greater than 20 microns.
**Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.
?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine EVOBUS O 309 (w/M102 Engine) 1984 MERCEDES-BENZ 190E L4-2.3L 87-86 MERCEDES-BENZ 190E L4-2.3L - Comparison
COMPETITOR NAME COMPETITOR PART # ACDelco PF2146 ACDelco PF2122 Beck/Arnley 041-8101 Big A 92325 Bosch 72187 Car Care OF4797 Carquest 85325 Cenex CO935 Champ P935 Champion OF430 Champion Filters OF430 Citgo Petroleum P935 Crosland 1017 Deutsch P935 Deutsch D497 Facet Industrial LC-13D-1 FERGUSON G1325 Filters Inc OF4797 FVP G1325 Girling F6611 Grand Prix P935 Group 7 L20013 Hastings LF381 IAPCO OF916 Installer Edge AL4797 IPD 10040 ITM 11-12708 ITM Autoparts 11-12708 Jiffy Lube HL4797 LUBER-FINER P935 MAHLE OX34D Mann-Filter H614 Mann-Filter H614X Mann-Filter H614N Master Parts P-935 Mercedes-Benz 102 180 0109 Mercedes-Benz 102 184 0325 Mighty Distributing System P935 Mighty Distributing System L20013 Mobil L20013 MPA 4215 NAPA 1325 OE+ OF-1025 Pentius PCB4797 Performax PO-134 Phillips 66 WO1325 Purolator L27013 Purolator L20013 Quaker State L20013 Quaker State PO-134 Security Filters P935 Shell - Archived L20013 STP P935 STP Filters P935 Unocal 76 OF1325 Vera 10-01170 VIPER 4797 Warner Filters P935 Wix 51325 - Installation
- Remove drain plug from housing cap if present and allow oil to drain from cap. Remove housing cap old gaskets/O-Rings and filter element. Discard the used filter element and gaskets/O-Rings in the proper manner.
- Clean filter housing components and apply a light coating of clean engine oil to the new provided gaskets/O-Rings. Install being careful to avoid damage to the gaskets/O-Rings. Avoid twisting of the gaskets/O-Rings.
- Install new filter element into the housing cap. Reinstall the housing cap and tighten to the proper installation torque as listed on the housing cap or in the service manual. Reinstall the housing cap drain if present to the proper installation torque.