Back To Search Results
FRAM Extra Guard® Oil Filter
SKU
CH4536
| Height (Inch) | 6.312 |
|---|---|
| Anti-Drain Back Valve | No |
| Bypass Relief Valve | No |
| Bottom Inside Diameter (Inch) | 0.938 |
| Filter Media Material | Cellulose/Synthetic Blend |
| O-Ring Inside Diameter (Inch) | 4.063 |
| O-Ring Outside Diameter (Inch) | 4.375 |
| O-Ring Thickness (Inch) | 0.156 |
| O-Rings Included | Yes |
| Outer Diameter Bottom (Inch) | 3.375 |
| Top Inside Diameter (Inch) | 0.500 |
| Torque Nut | No |
| Washer Inside Diameter (Inch) | 0.563 |
| Washer Outside Diameter (Inch) | 0.750 |
| Washer Thickness (Inch) | 0.063 |
Where To Shop
Search
Search
- Description
FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Engineered for conventional and synthetic motor oil, Extra Guard offers proven engine protection for up to 10,000 miles (16,000 kilometers).
- Proven protection for up to 10,000 miles (16,000 kilometers)
- Engineered for use with synthetic or conventional motor oils
- Filter media is a blend of fiber and resin that captures 95%?of the dirt particles
- The perfect balance of dirt-trapping efficiency and dirt-holding capacity
- Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today’s engines
*FRAM Group testing of average filter efficiency of PH8A, PH3387A and PH4967 under ISO 4548-12 for particles greater than 20 microns.
**Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.
?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 85-84 MERCEDES-BENZ 190D L4-2.2L 89-86 MERCEDES-BENZ 190D L5-2.5L 93-90 MERCEDES-BENZ 300D L5-2.5L 1987 MERCEDES-BENZ 300D L6-3.0L 93-92 MERCEDES-BENZ 300SD L6-3.4L 87-86 MERCEDES-BENZ 300SDL L6-3.0L 1987 MERCEDES-BENZ 300TD L6-3.0L 1991 MERCEDES-BENZ 350SD L6-3.4L 91-90 MERCEDES-BENZ 350SDL L6-3.4L 1995 MERCEDES-BENZ E300 L6-3.0L 95-94 MERCEDES-BENZ S350 L6-3.4L - Comparison
COMPETITOR NAME COMPETITOR PART # ACDelco PF2053 Baldwin P7615 Beck/Arnley 041-8085 Big A 92289 Bosch 72162 Carquest 85289 Cenex CO829 Champ P829 Champion OF431 Champion Filters OF431 Citgo Petroleum P829 Crosland 1013 Deutsch D652 Donaldson P550361 Facet Industrial LC-39 FERGUSON G1289 Fleetguard LF3584 FVP G1289 Girling F1013 Grand Prix P829 Group 7 L40039 Hastings LF390 IAPCO OF514 IAPCO A-0240-013 Installer Edge AL4536 IPD 10134 ITM 111-2709 ITM 11-12709 ITM Autoparts 11-12709 ITM Autoparts 111-2709 Jiffy Lube HL4536 Jiffy Lube JL39 Kralinator D912 LUBER-FINER P829 MAHLE OX38D Mann-Filter PF1050/1N Master Parts P-829 Mercedes-Benz 601 180 0109 Mercedes-Benz 601 184 0025 Mercedes-Benz 601 180 0009 Mighty Distributing System M39D Mobil L40039 MPA 4213 MPA 4211 NAPA 1289 OE+ OF-1435 Pentius PCB4536 Performax PO-133 Phillips 66 WO1289 Purolator L40039 Quaker State L40039 Quaker State 4536 Quaker State PO-133 Security Filters P829 Shell - Archived L40039 STP S4536 STP Filters S4536 Unocal 76 OF1289 Valvoline LC-829 Valvoline LC829 Vera 10-01162 VIPER 4536 Warner P829 Warner Filters P829 Wix 51289 - Installation
- Remove drain plug from housing cap if present and allow oil to drain from cap. Remove housing cap old gaskets/O-Rings and filter element. Discard the used filter element and gaskets/O-Rings in the proper manner.
- Clean filter housing components and apply a light coating of clean engine oil to the new provided gaskets/O-Rings. Install being careful to avoid damage to the gaskets/O-Rings. Avoid twisting of the gaskets/O-Rings.
- Install new filter element into the housing cap. Reinstall the housing cap and tighten to the proper installation torque as listed on the housing cap or in the service manual. Reinstall the housing cap drain if present to the proper installation torque.