Back To Search Results
FRAM Extra Guard® Oil Filter
SKU
CH12059
| Height (Inch) | 6.102 |
|---|---|
| Outer Diameter Top (Inch) | 2.204 |
| Anti-Drain Back Valve | No |
| Bypass Relief Valve | No |
| Filter Media Material | Cellulose/Synthetic Blend |
| Inside Diameter Bottom (Inch) | 0.889 |
| O-Ring Inside Diameter (Inch) | 2.535 |
| O-Ring Outside Diameter (Inch) | 2,672 |
| O-Ring Thickness (Inch) | 0.137 |
| O-Rings Included | Yes |
| Outer Diameter Bottom (Inch) | 2.204 |
| Top Inside Diameter (Inch) | 0.889 |
| Torque Nut | No |
| Washer Inside Diameter (Inch) | 0.472 |
| Washer Outside Diameter (Inch) | 0.669 |
| Washer Thickness (Inch) | 0.059 |
Where To Shop
Search
Search
- Description
FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Engineered for conventional and synthetic motor oil, Extra Guard offers proven engine protection for up to 10,000 miles (16,000 kilometers).
- Proven protection for up to 10,000 miles (16,000 kilometers)
- Engineered for use with synthetic or conventional motor oils
- Filter media is a blend of fiber and resin that captures 95%?of the dirt particles
- The perfect balance of dirt-trapping efficiency and dirt-holding capacity
- Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today’s engines
*FRAM Group testing of average filter efficiency of PH8A, PH3387A and PH4967 under ISO 4548-12 for particles greater than 20 microns.
**Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.
?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 18-16 BMW 340I L6-3.0L 19-17 BMW 340I GT XDRIVE L6-3.0L 18-16 BMW 340I XDRIVE L6-3.0L 20-17 BMW 440I L6-3.0L 21-17 BMW 440I GRAN COUPE L6-3.0L 20-17 BMW 440I XDRIVE L6-3.0L 20-17 BMW 440I XDRIVE GRAN COUPE L6-3.0L 2018 BMW 540D XDRIVE L6-3.0L 23-17 BMW 540I L6-3.0L 24-17 BMW 540I XDRIVE L6-3.0L 19-18 BMW 640I XDRIVE GRAN TURISMO L6-3.0L 24-16 BMW 740I L6-3.0L 22-17 BMW 740I XDRIVE L6-3.0L 22-20 BMW 745E XDRIVE L6-3.0L 22-20 BMW 745LE XDRIVE L6-3.0L 2024 BMW 750E XDRIVE L6-3.0L 24-20 BMW 840I L6-3.0L 24-20 BMW 840I GRAN COUPE L6-3.0L 24-20 BMW 840I XDRIVE L6-3.0L 24-20 BMW 840I XDRIVE GRAN COUPE L6-3.0L 21-17 BMW M240I L6-3.0L 24-23 BMW M240I L6-3.0L 24-17 BMW M240I XDRIVE L6-3.0L 24-20 BMW M340I L6-3.0L 24-20 BMW M340I XDRIVE L6-3.0L 24-21 BMW M440I L6-3.0L 24-22 BMW M440I GRAN COUPE L6-3.0L 24-21 BMW M440I XDRIVE L6-3.0L 23-22 BMW M440I XDRIVE GRAN COUPE L6-3.0L 24-18 BMW X3 L6-3.0L 24-19 BMW X4 L6-3.0L 24-19 BMW X5 L6-3.0L 24-20 BMW X6 L6-3.0L 24-19 BMW X7 L6-3.0L 24-20 BMW Z4 L6-3.0L 24-20 TOYOTA GR SUPRA L6-3.0L - Comparison
COMPETITOR NAME COMPETITOR PART # BMW 11 42 7 826 799 BMW 11 42 8 583 898 FRAM Force FF12059 LUBER-FINER P1070 MicroGard Select MSL10342 PurolatorONE PL41404 STP Filters S90186 STP Filters S90186XL UFI 25.148.00 Wix WL10342 - Installation
- Remove drain plug from housing cap if present and allow oil to drain from cap. Remove housing cap old gaskets/O-Rings and filter element. Discard the used filter element and gaskets/O-Rings in the proper manner.
- Clean filter housing components and apply a light coating of clean engine oil to the new provided gaskets/O-Rings. Install being careful to avoid damage to the gaskets/O-Rings. Avoid twisting of the gaskets/O-Rings.
- Install new filter element into the housing cap. Reinstall the housing cap and tighten to the proper installation torque as listed on the housing cap or in the service manual. Reinstall the housing cap drain if present to the proper installation torque.