Back To Search Results
FRAM Extra Guard® Oil Filter
SKU
CH11935
| Performance | No Grade |
|---|---|
| Height | 2.834 (in.) |
| Anti-drain Back Valve | No |
| Bypass Relief Valve | No |
| Drain Plug Included | Yes |
| Filter Media Material | Cellulose/Synthetic Blend |
| Inside Diameter Bottom | 1.299 (in.) |
| Non Slip Grip | No |
| O-ring (1) Inside Diameter | 0.472 (in.) |
| O-ring (1) Outside Diameter | 0.566 (in.) |
| O-ring (1) Thickness | 0.094 (in.) |
| O-ring Inside Diameter | 3.661 (in.) |
| O-ring Outside Diameter | 3.818 (in.) |
| O-ring Thickness | 0.157 (in.) |
| O-rings Included | Yes |
| Outer Diameter Bottom | 3.248 (in.) |
| Outer Diameter Top | 3.248 (in.) |
| Top Inside Diameter | 1.299 (in.) |
| Torque Nut | No |
| Washer Inside Diameter | 0.559 (in.) |
| Washer Outside Diameter | 0.779 (in.) |
| Washer Thickness | 0.078 (in.) |
- Description
FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Engineered for conventional and synthetic motor oil, Extra Guard offers proven engine protection for up to 10,000 miles (16,000 kilometers).
- Proven protection for up to 10,000 miles (16,000 kilometers)
- Engineered for use with synthetic or conventional motor oils
- Filter media is a blend of fiber and resin that captures 95%?of the dirt particles
- The perfect balance of dirt-trapping efficiency and dirt-holding capacity
- Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today’s engines
*FRAM Group testing of average filter efficiency of PH8A, PH3387A and PH4967 under ISO 4548-12 for particles greater than 20 microns.
**Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.
?Not all features are available on every part number in the product line. Check the package for specific features of individual filters. - Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 2015 Hyundai Genesis 5.0L 2016 Hyundai Genesis 5.0L 2017 Genesis G80 5.0L 2017 Genesis G90 5.0L 2018 Genesis G80 5.0L 2018 Genesis G90 5.0L 2019 Genesis G80 5.0L 2019 Genesis G90 5.0L 2020 Genesis G80 5.0L 2020 Genesis G90 5.0L 2021 Genesis G90 5.0L - Comparison
COMPETITOR NAME COMPETITOR PART # - Installation
- Remove drain plug from housing cap if present and allow oil to drain from cap. Remove housing cap old gaskets/O-Rings and filter element. Discard the used filter element and gaskets/O-Rings in the proper manner.
- Clean filter housing components and apply a light coating of clean engine oil to the new provided gaskets/O-Rings. Install being careful to avoid damage to the gaskets/O-Rings. Avoid twisting of the gaskets/O-Rings.
- Install new filter element into the housing cap. Reinstall the housing cap and tighten to the proper installation torque as listed on the housing cap or in the service manual. Reinstall the housing cap drain if present to the proper installation torque.