Back To Search Results
FRAM Extra Guard® Oil Filter
SKU
CH11885
| Height (Inch) | 4.920 |
|---|---|
| Outer Diameter Top (Inch) | 2.090 |
| Anti-Drain Back Valve | No |
| Bypass Relief Valve | No |
| Drain Plug Included | Yes |
| Filter Media Material | Cellulose/Synthetic Blend |
| Inside Diameter Bottom (Inch) | 0.748 |
| O-Ring Inside Diameter (Inch) | 2.303 |
| O-Ring Outside Diameter (Inch) | 2.440 |
| O-Ring Thickness (Inch) | 0.137 |
| O-Rings Included | Yes |
| Outer Diameter Bottom (Inch) | 2.090 |
| Top Inside Diameter (Inch) | 0.748 |
| Torque Nut | No |
| Washer Inside Diameter (Inch) | 0.492 |
| Washer Outside Diameter (Inch) | 0.661 |
| Washer Thickness (Inch) | 0.059 |
Where To Shop
Search
Search
- Description
FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Engineered for conventional and synthetic motor oil, Extra Guard offers proven engine protection for up to 10,000 miles (16,000 kilometers).
- Proven protection for up to 10,000 miles (16,000 kilometers)
- Engineered for use with synthetic or conventional motor oils
- Filter media is a blend of fiber and resin that captures 95%?of the dirt particles
- The perfect balance of dirt-trapping efficiency and dirt-holding capacity
- Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today’s engines
*FRAM Group testing of average filter efficiency of PH8A, PH3387A and PH4967 under ISO 4548-12 for particles greater than 20 microns.
**Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.
?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 2025 BMW 228 XDRIVE GRAN COUPE L4-2.0L 17-15 BMW I8 L3-1.5L 20-19 BMW I8 L3-1.5L 19-16 BMW X1 L4-2.0L 25-23 BMW X1 L4-2.0L 19-18 BMW X2 L4-2.0L 25-24 BMW X2 L4-2.0L 19-14 MINI COOPER L3-1.5L 19-14 MINI COOPER L4-2.0L 19-16 MINI COOPER CLUBMAN L3-1.5L 19-16 MINI COOPER CLUBMAN L4-2.0L 24-17 MINI COOPER COUNTRYMAN L3-1.5L 19-17 MINI COOPER COUNTRYMAN L4-2.0L 2025 MINI COUNTRYMAN L4-2.0L - Comparison
COMPETITOR NAME COMPETITOR PART # Beck/Arnley 041-0874 BMW 11 42 8 575 210 BMW 11 42 8 570 590 Carquest Premium Filters 95209 Champ P1035 ECOGARD X10383 FRAM Drive FD11885 FRAM Tough Guard TG11885 FRAM Ultra Synthetic XG11885 LUBER-FINER P1035 Mann-Filter HU6015ZKIT Mobil P1035 NAPA Gold Filters 107522 Premium Guard PG99098EX Purolator L28209 STP Filters S11885 STP Filters S11885XL Warner WP1035 Warner Filters WP1035 Wix WL7522 - Installation
- Remove drain plug from housing cap if present and allow oil to drain from cap. Remove housing cap old gaskets/O-Rings and filter element. Discard the used filter element and gaskets/O-Rings in the proper manner.
- Clean filter housing components and apply a light coating of clean engine oil to the new provided gaskets/O-Rings. Install being careful to avoid damage to the gaskets/O-Rings. Avoid twisting of the gaskets/O-Rings.
- Install new filter element into the housing cap. Reinstall the housing cap and tighten to the proper installation torque as listed on the housing cap or in the service manual. Reinstall the housing cap drain if present to the proper installation torque.