Back To Search Results

FRAM Extra Guard® Oil Filter

SKU
CH11791
More Information
Height (Inch) 4.685
Outer Diameter Top (Inch) 2.677
Anti-Drain Back Valve No
Bypass Relief Valve No
Filter Media Material Cellulose/Synthetic Blend
Inside Diameter Bottom Closed
O-Ring (1) Inside Diameter (Inch) 0.748
O-Ring (1) Outside Diameter (Inch) 0.846
O-Ring (1) Thickness (Inch) 0.098
O-Ring (2) Inside Diameter (Inch) 0.433
O-Ring (2) Outside Diameter (Inch) 0.531
O-Ring (2) Thickness (Inch) 0.098
O-Ring Inside Diameter (Inch) 3.071
O-Ring Outside Diameter (Inch) 3.201
O-Ring Thickness (Inch) 0.130
O-Rings Included Yes
Outer Diameter Bottom (Inch) 2.677
Top Inside Diameter (Inch) 0.760
Torque Nut No
More Information
Where To Shop
Search
  • Description

    FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Engineered for conventional and synthetic motor oil, Extra Guard offers proven engine protection for up to 10,000 miles (16,000 kilometers).

    • Proven protection for up to 10,000 miles (16,000 kilometers)
    • Engineered for use with synthetic or conventional motor oils
    • Filter media is a blend of fiber and resin that captures 95%?of the dirt particles
    • The perfect balance of dirt-trapping efficiency and dirt-holding capacity
    • Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today’s engines

    *FRAM Group testing of average filter efficiency of PH8A, PH3387A and PH4967 under ISO 4548-12 for particles greater than 20 microns.

    **Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.

    ?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    18-13 AUDI A8 QUATTRO V8-4.0L
    18-14 AUDI RS7 V8-4.0L
    18-13 AUDI S6 V8-4.0L
    18-13 AUDI S7 V8-4.0L
    18-13 AUDI S8 V8-4.0L
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    Champ P1019
    Coopers FA6790ECO
    LUBER-FINER P1019
    Mighty Distributing System M9014
    Purflux L1070
    PurolatorONE PL21425
    STP S11791
    STP Filters S11791
    Tecnocar OP1040
    UFI 25.090.00
    Volkswagen 079 115 561J
    Volkswagen 079 198 405D
    Wix WL10350
  • Installation
    1. Remove drain plug from housing cap if present and allow oil to drain from cap. Remove housing cap old gaskets/O-Rings and filter element. Discard the used filter element and gaskets/O-Rings in the proper manner.
    2. Clean filter housing components and apply a light coating of clean engine oil to the new provided gaskets/O-Rings. Install being careful to avoid damage to the gaskets/O-Rings. Avoid twisting of the gaskets/O-Rings.
    3. Install new filter element into the housing cap. Reinstall the housing cap and tighten to the proper installation torque as listed on the housing cap or in the service manual. Reinstall the housing cap drain if present to the proper installation torque.