Toggle Nav
PARTS SEARCH
  • Compare Products
Menu
Account
Settings
Language
English
Back To Search Results

FRAM Extra Guard® Oil Filter

Add to Compare
SKU
CH11246
More Information
Height (Inch) 6.186
Outer Diameter Top (Inch) 1.852
Anti-Drain Back Valve No
Bypass Relief Valve No
Filter Media Material Cellulose/Synthetic Blend
Inside Diameter Bottom (Inch) 0.709
O-Ring (1) Inside Diameter (Inch) 0.630
O-Ring (1) Outside Diameter (Inch) 0.709
O-Ring (1) Thickness (Inch) 0.079
O-Ring (2) Inside Diameter (Inch) 0.552
O-Ring (2) Outside Diameter (Inch) 0.630
O-Ring (2) Thickness (Inch) 0.079
O-Ring Inside Diameter (Inch) 2.049
O-Ring Outside Diameter (Inch) 2.195
O-Ring Thickness (Inch) 0.146
O-Rings Included Yes
Outer Diameter Bottom (Inch) 1.852
Top Inside Diameter (Inch) 0.709
Torque Nut No
More Information
Where To Shop
Search
  • Description

    FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Engineered for conventional and synthetic motor oil, Extra Guard offers proven engine protection for up to 10,000 miles (16,000 kilometers).

    • Proven protection for up to 10,000 miles (16,000 kilometers)
    • Engineered for use with synthetic or conventional motor oils
    • Filter media is a blend of fiber and resin that captures 95%?of the dirt particles
    • The perfect balance of dirt-trapping efficiency and dirt-holding capacity
    • Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today’s engines

    *FRAM Group testing of average filter efficiency of PH8A, PH3387A and PH4967 under ISO 4548-12 for particles greater than 20 microns.

    **Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.

    ?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    15-12 MERCEDES-BENZ C250 L4-1.8L
    15-12 MERCEDES-BENZ SLK250 L4-1.8L
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    Champ P997
    Champion COC36289
    Champion Filters COC36289
    FERGUSON G2711800309
    FRAM Drive FD11246
    FVP G2711800309
    Hengst E207HD221
    LUBER-FINER P997
    MAHLE OX183/2D
    MAHLE OX183/5DECO
    MAHLE OX183/2D ECO
    Mann-Filter HU 514 Y
    Mann-Filter HU514Y
    Mercedes-Benz A 271 180 0409
    Mercedes-Benz 271 180 0309
    Mercedes-Benz 271 184 0425
    Mercedes-Benz A 271 180 0309
    Mercedes-Benz 271 180 0409
    Mercedes-Benz 271 180 0509
    Mercedes-Benz A 271 184 0425
    MicroGard Select MSL10059
    Performax PO-187
    Premium Guard PG6289
    Premium Guard POF6288
    Purolator L36289
    STP S11246
    STP Filters S11246
    STP Filters S11246XL
    Valvoline VO-151
    Wix 57009
  • Installation
    1. Remove drain plug from housing cap if present and allow oil to drain from cap. Remove housing cap old gaskets/O-Rings and filter element. Discard the used filter element and gaskets/O-Rings in the proper manner.
    2. Clean filter housing components and apply a light coating of clean engine oil to the new provided gaskets/O-Rings. Install being careful to avoid damage to the gaskets/O-Rings. Avoid twisting of the gaskets/O-Rings.
    3. Install new filter element into the housing cap. Reinstall the housing cap and tighten to the proper installation torque as listed on the housing cap or in the service manual. Reinstall the housing cap drain if present to the proper installation torque.