Back To Search Results
FRAM Extra Guard® Oil Filter
SKU
CH11038
| Height (Inch) | 4.233 |
|---|---|
| Outer Diameter Top (Inch) | 3.263 |
| Anti-Drain Back Valve | No |
| Bypass Relief Valve | No |
| Filter Media Material | Cellulose/Synthetic Blend |
| Inside Diameter Bottom (Inch) | 1.225 |
| O-Ring (1) Inside Diameter (Inch) | 0.433 |
| O-Ring (1) Outside Diameter (Inch) | 0.535 |
| O-Ring (1) Thickness (Inch) | 0.102 |
| O-Ring Inside Diameter (Inch) | 3.622 |
| O-Ring Outside Diameter (Inch) | 3.779 |
| O-Ring Thickness (Inch) | 0.157 |
| O-Rings Included | Yes |
| Outer Diameter Bottom (Inch) | 3.263 |
| Top Inside Diameter (Inch) | 1.225 |
| Torque Nut | No |
| Washer Inside Diameter (Inch) | 0.484 |
| Washer Outside Diameter (Inch) | 0.661 |
| Washer Thickness (Inch) | 0.051 |
Where To Shop
Search
Search
- Description
FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Engineered for conventional and synthetic motor oil, Extra Guard offers proven engine protection for up to 10,000 miles (16,000 kilometers).
- Proven protection for up to 10,000 miles (16,000 kilometers)
- Engineered for use with synthetic or conventional motor oils
- Filter media is a blend of fiber and resin that captures 95%?of the dirt particles
- The perfect balance of dirt-trapping efficiency and dirt-holding capacity
- Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today’s engines
*FRAM Group testing of average filter efficiency of PH8A, PH3387A and PH4967 under ISO 4548-12 for particles greater than 20 microns.
**Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.
?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 10-06 BMW M5 V10-5.0L 10-06 BMW M6 V10-5.0L 25-17 PORSCHE 911 H6-3.0L 16-12 PORSCHE 911 H6-3.4L 12-09 PORSCHE 911 H6-3.6L 25-21 PORSCHE 911 H6-3.7L 19-09 PORSCHE 911 H6-3.8L 18-15 PORSCHE CAYENNE V6-3.6L 18-08 PORSCHE CAYENNE V8-4.8L 18-15 PORSCHE MACAN V6-3.0L 18-15 PORSCHE MACAN V6-3.6L 16-14 PORSCHE PANAMERA V6-3.0L 16-11 PORSCHE PANAMERA V6-3.6L 16-10 PORSCHE PANAMERA V8-4.8L - Comparison
COMPETITOR NAME COMPETITOR PART # Beck/Arnley 041-0838 BMW 11 42 7 834 734 BMW 11 42 7 840 594 Carquest 84694 Carquest Premium Filters 84694 Champ P908 FERGUSON G7694 FVP G7694 GK Industries EF25691 Hastings LF666 Hengst E113H D235 LUBER-FINER P908 MAHLE OX 254D4 ECO MAHLE OX254D2ECO MAHLE OX 254D ECO MAHLE OX 254D2 ECO Mann-Filter HU926/5X Mann-Filter HU9001X NAPA 7694 Porsche 948 107 222 00 Porsche 0PB 115 466 Premium Guard PG5691 PUREPRO PL5691 Purolator L25691 Service Champ CF5691 STP P908 STP Filters P908 STP Filters P908XL Volkswagen 948 107 222 00 Volkswagen 0PB 115 466 Warner WP908 Warner Filters WP908 Wix 57694 - Installation
- Remove drain plug from housing cap if present and allow oil to drain from cap. Remove housing cap old gaskets/O-Rings and filter element. Discard the used filter element and gaskets/O-Rings in the proper manner.
- Clean filter housing components and apply a light coating of clean engine oil to the new provided gaskets/O-Rings. Install being careful to avoid damage to the gaskets/O-Rings. Avoid twisting of the gaskets/O-Rings.
- Install new filter element into the housing cap. Reinstall the housing cap and tighten to the proper installation torque as listed on the housing cap or in the service manual. Reinstall the housing cap drain if present to the proper installation torque.