Toggle Nav
PARTS SEARCH
  • Compare Products
Menu
Account
Settings
Language
English
Back To Search Results

FRAM Drive™ Oil Filter

Add to Compare
SKU
FD12246
More Information
Height (Inch) 4.567
Outer Diameter Top (Inch) 2.244
Anti-Drain Back Valve No
Bypass Relief Valve Yes
Filter Media Material Cellulose/Synthetic Blend
Inside Diameter Bottom (Inch) 0.866
O-Ring Inside Diameter (Inch) 2.461
O-Ring Outside Diameter (Inch) 2.599
O-Ring Thickness (Inch) 0.138
O-Rings Included Yes
Outer Diameter Bottom (Inch) 2.244
Top Inside Diameter By-Pass Valve
Torque Nut No
More Information
Where To Shop
Search
  • Description

    FRAM Drive™ is the perfect oil filter for everyday driver. Designed with OE grade synthetic blend media and compatible with both conventional and synthetic oil types, FRAM Drive™ keeps engine protected for up to 7,500 miles (12,000 kilometers). FRAM Drive™ is engineered to withstand high temperatures and endure working pressures common in today’s engines.

    • Proven protection for up to 7,500 miles (12,000 kilometers)
    • Engineered for use with synthetic or conventional motor oil
    • Precision Relief Valve provides consistent oil flow, even in cold conditions
    • Designed for everyday drivers who perform oil changes at OE (original equipment) recommended intervals
    • Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today’s engines

    *FRAM Group testing of filter performance of FD8A and FD7317 under ISO4548- 12

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    20-13 BUICK ENCORE L4-1.4L
    15-13 CHEVROLET CRUZE L4-1.4L
    15-13 CHEVROLET CRUZE L4-1.8L
    2016 CHEVROLET CRUZE LIMITED L4-1.4L
    19-13 CHEVROLET SONIC L4-1.4L
    18-13 CHEVROLET SONIC L4-1.8L
    20-13 CHEVROLET TRAX L4-1.4L
    14-13 CHEVROLET TRAX L4-1.8L
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    ACDelco PF2263G
    Champ P1051
    FRAM Core COR12246ACC
    FRAM Extra Guard CH12246
    FRAM Pro FP12246BP
    General Motors 25195775
    General Motors 25195785
    LUBER-FINER P1051
    MicroGard MGL57674
    MicroGard Select MSL57674
    NAPA Gold Filters 100283
    Parts Master WL610283
    Purolator L29177
    STP Filters S12246XL
    STP Filters S12246
    Wix WL10283
  • Installation
    1. Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot.
    2. Place a drain pan under the oil filter and unscrew oil filter.
    3. Clean mounting base making sure the O-ring from the old filter is not stuck to the filter mount.
    4. Apply film of clean oil to filter gasket. Do not use grease.
    5. Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers.
    6. Check owner’s manual for correct oil specification viscosity and amount.
    7. Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
    8. Shut off engine and recheck oil level after 5 minutes and top off as necessary.