Toggle Nav
PARTS SEARCH
  • Compare Products
Menu
Account
Settings
Language
English
Back To Search Results

FRAM Drive™ Oil Filter

Add to Compare
SKU
FD11462
More Information
Height (Inch) 2.550
Outside Diameter (Inch) 2.670
Anti-Drain Back Valve Yes
Bypass Relief Valve Yes
Gasket Inside Diameter (Inch) 2.210
Gasket Outside Diameter (Inch) 2.480
Gasket Thickness (Inch) 0.205
Gasket Type Base
Attachment Type Spin-On
Burst Pressure (Pounds per Square Inch) 350.000
Bypass Relief Valve Setting (Pounds per Square Inch) 9-15
Filter Media Material Cellulose/Synthetic Blend
Inlet Type Threaded
Inside Thread Diameter (Millimeter) M18x1.5
Thread Size Metric
Torque Nut No
More Information
Where To Shop
Search
  • Description

    FRAM Drive™ is the perfect oil filter for everyday driver. Designed with OE grade synthetic blend media and compatible with both conventional and synthetic oil types, FRAM Drive™ keeps engine protected for up to 7,500 miles (12,000 kilometers). FRAM Drive™ is engineered to withstand high temperatures and endure working pressures common in today’s engines.

    • Proven protection for up to 7,500 miles (12,000 kilometers)
    • Engineered for use with synthetic or conventional motor oil
    • Precision Relief Valve provides consistent oil flow, even in cold conditions
    • Designed for everyday drivers who perform oil changes at OE (original equipment) recommended intervals
    • Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today’s engines

    *FRAM Group testing of filter performance of FD8A and FD7317 under ISO4548- 12

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    15-12 CHEVROLET SPARK L4-1.2L
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    Baldwin B40000
    Champ PH2873
    FERGUSON R0001
    Firestone PH2873
    FRAM Drive FD11462
    FVP R0001
    General Motors 96985730
    Hastings LF721
    LUBER-FINER PH2873
    MAHLE OC996
    NAPA Gold Filters 100001
    NAPA ProSelect Filters 2100001
    Parts Master WL610001
    Pennzoil PZ188
    Pennzoil PZ-188
    Performax PO-188
    Premium Guard PG6291
    PUREPRO L6291
    Purolator L16291
    Service Champ OF6291
    STP S11462
    STP Filters S11462
    Valvoline VO-123
    Warner WPH2873
    Warner Filters WPH2873
    Wix WL10001
  • Installation
    1. Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot.
    2. Place a drain pan under the oil filter and unscrew oil filter.
    3. Clean mounting base making sure the O-ring from the old filter is not stuck to the filter mount.
    4. Apply film of clean oil to filter gasket. Do not use grease.
    5. Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers.
    6. Check owner’s manual for correct oil specification viscosity and amount.
    7. Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
    8. Shut off engine and recheck oil level after 5 minutes and top off as necessary.