Back To Search Results
FRAM Drive™ Oil Filter
SKU
FD10855
| Height (Inch) | 4.810 |
|---|---|
| Anti-Drain Back Valve | No |
| Bypass Relief Valve | No |
| Bottom Inside Diameter (Inch) | 0.748 |
| Filter Media Material | Cellulose/Synthetic Blend |
| O-Ring (1) Inside Diameter (Inch) | 0.260 |
| O-Ring (1) Outside Diameter (Inch) | 0.347 |
| O-Ring (1) Thickness (Inch) | 0.087 |
| O-Ring Inside Diameter (Inch) | 2.866 |
| O-Ring Outside Diameter (Inch) | 3.008 |
| O-Ring Thickness (Inch) | 0.142 |
| O-Rings Included | Yes |
| Outer Diameter Bottom (Inch) | 2.579 |
| Top Inside Diameter (Inch) | 1.000 |
| Torque Nut | No |
| Washer Inside Diameter (Inch) | 0.563 |
| Washer Outside Diameter (Inch) | 0.768 |
| Washer Thickness (Inch) | 0.059 |
Where To Shop
Search
Search
- Description
FRAM Drive™ is the perfect oil filter for everyday driver. Designed with OE grade synthetic blend media and compatible with both conventional and synthetic oil types, FRAM Drive™ keeps engine protected for up to 7,500 miles (12,000 kilometers). FRAM Drive™ is engineered to withstand high temperatures and endure working pressures common in today’s engines.
- Proven protection for up to 7,500 miles (12,000 kilometers)
- Engineered for use with synthetic or conventional motor oil
- Precision Relief Valve provides consistent oil flow, even in cold conditions
- Designed for everyday drivers who perform oil changes at OE (original equipment) recommended intervals
- Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today’s engines
*FRAM Group testing of filter performance of FD8A and FD7317 under ISO4548- 12
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 17-12 HYUNDAI AZERA V6-3.3L 18-13 HYUNDAI SANTA FE V6-3.3L 12-10 HYUNDAI SANTA FE V6-3.5L 19-13 HYUNDAI SANTA FE XL V6-3.3L 16-14 KIA CADENZA V6-3.3L 18-15 KIA SEDONA V6-3.3L 12-11 KIA SEDONA V6-3.5L 2014 KIA SEDONA V6-3.5L 18-14 KIA SORENTO V6-3.3L 13-11 KIA SORENTO V6-3.5L - Comparison
COMPETITOR NAME COMPETITOR PART # Bosch 72270WS Carquest 84050 Carquest R84050 Carquest Premium Filters 84050 Carquest Standard Filters R84050 Certified CCH10855 Champ P989 Defense Filters DL10855 FERGUSON G7050 Forecast OF73 FRAM Drive FD10855 FRAM Tough Guard TG10855 FRAM Ultra Synthetic XG10855 FVP G7050 Hastings LF653 Hyundai 26320-3CAA0 K&N PS-7030 Kia 26320-3CAA0 LUBER-FINER P989 MAHLE OX 417D MAHLE OX417D MicroGard MGL10164 MicroGard MGA10082 MicroGard MGL10855 Mighty Distributing System M989 MotoMaster MCH10855 NAPA 100032 NAPA 2100082 NAPA 7050 NAPA 100164 NAPA ProSelect Filters 2100164 NAPA ProSelect Filters 2100032 NAPA ProSelect Filters 100082 Parts Master WL610082 Parts Master 67050 Parts Master WL610164 Pennzoil PZ179 Performax PO-179 Premium Guard PG6127 Promotive PH6127 Pronto PO-6127 PureZone 8-10164 Purolator L26127 Purolator PureONE PL26127 PurolatorONE PL26127 Service Champ CF6127 STP S10855 STP Filters S10855XL STP Filters S10855 Tough Guard TG10855 Ultra XG10855 Valvoline VO-109 Wix WL10082 Wix WL10164 Wix 57050 - Installation
- Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot.
- Place a drain pan under the oil filter and unscrew oil filter.
- Clean mounting base making sure the O-ring from the old filter is not stuck to the filter mount.
- Apply film of clean oil to filter gasket. Do not use grease.
- Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers.
- Check owner’s manual for correct oil specification viscosity and amount.
- Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
- Shut off engine and recheck oil level after 5 minutes and top off as necessary.