FRAM Ultra Synthetic® Oil Filter
| Height (Inch) | 4.45 |
|---|---|
| Outside Diameter (Inch) | 2.98 |
| Anti-Drain Back Valve | Yes |
| Bypass Relief Valve | Yes |
| Gasket Inside Diameter (Inch) | 2.39 |
| Gasket Outside Diameter (Inch) | 2.77 |
| Gasket Thickness (Inch) | 0.38 |
| Gasket Type | Base |
| Attachment Type | Spin-On |
| Burst Pressure (Pounds per Square Inch) | 400 |
| Bypass Relief Valve Setting (Pounds per Square Inch) | 22-28 |
| Filter Media Material | Synthetic |
| Inlet Type | Threaded |
| Inside Thread Diameter (Millimeter) | M22x1.5 |
| Thread Size | Metric |
| Torque Nut | No |
Search
- Description
FRAM Ultra Synthetic® oil filters are engineered for drivers who are looking for ultimate performance and engine protection. Its dual-layered synthetic blend media provides 99%+ filtering efficiency and protects up to 20,000 miles (32,000 kilometers). The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter. FRAM Ultra Synthetic is equipped with SureGrip® technology that provides a non-slip surface allowing for easy install and removal.
- Proven protection for up to 20,000 miles (32,000 kilometers)
- SureGrip® technology for easy install and removal
- Silicone anti-drain back valve helps ensure safe engine start up
- Dual-layered synthetic blend media provides 99%+ filtration efficiency*
- Optimized for synthetic motor oil
*FRAM Group testing of average filter efficiency of XG8A, XG3387A and XG4967 under ISO 4548-12 for particles greater than 20 microns.
**FRAM Group mulitpass testing of representative sampling of average filter capacity of comparable competitive retail products based on ISO4548-12 for XG8A and XG3387A.
***Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.
+ FRAM Group testing per USCAR-36 Low Temperature Leakage test after hot oil, when compared to standard nitrile gasket.
?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 2020 BUICK ENCLAVE V6-3.6L 19-17 BUICK LACROSSE V6-3.6L 20-18 BUICK REGAL SPORTBACK V6-3.6L 19-16 CADILLAC ATS V6-3.6L 19-16 CADILLAC CT6 V6-3.0L 20-16 CADILLAC CT6 V6-3.6L 19-16 CADILLAC CTS V6-3.6L 25-17 CADILLAC XT5 V6-3.6L 25-20 CADILLAC XT6 V6-3.6L 25-19 CHEVROLET BLAZER V6-3.6L 24-16 CHEVROLET CAMARO V6-3.6L 2020 CHEVROLET TRAVERSE V6-3.6L 23-17 GMC ACADIA V6-3.6L - Comparison
COMPETITOR NAME COMPETITOR PART # ACDelco UPF63R Champ PH1500 FRAM Drive FD12750 FRAM Force FF12750 FRAM Ultra Synthetic XG12750 General Motors 12693541 LUBER-FINER PH1500 Mighty Distributing System M9512 Motomaster OE Plus MOPH12750 NAPA Gold Filters 100412 Parts Master WL610412 PUREPRO PL21495 PurolatorONE PL21495 Service Champ WPH1500 STP Filters S45013 Valvoline VO-201 Warner WPH1500 Warner Filters WPH1500 Wix WL10412 - Installation
- Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot.
- Place a drain pan under the oil filter and unscrew oil filter.
- Clean mounting base making sure the O-ring from the old filter is not stuck to the filter mount.
- Apply film of clean oil to filter gasket. Do not use grease.
- Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers.
- Check owner’s manual for correct oil specification viscosity and amount.
- Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
- Shut off engine and recheck oil level after 5 minutes and top off as necessary.