FRAM Ultra Synthetic® Oil Filter
| Height (Inch) | 3.11 |
|---|---|
| Outside Diameter (Inch) | 2.942 |
| Anti-Drain Back Valve | Yes |
| Bypass Relief Valve | No |
| Gasket Inside Diameter (Inch) | 2.39 |
| Gasket Outside Diameter (Inch) | 2.76 |
| Gasket Thickness (Inch) | 0.45 |
| Gasket Type | Base |
| Attachment Type | Spin-On |
| Burst Pressure (Pounds per Square Inch) | 300 |
| Drain Plug Included | Yes |
| Filter Media Material | Synthetic |
| Inlet Type | Threaded |
| Inside Thread Diameter (Inch) | 1-16 |
| Thread Size | Standard |
| Torque Nut | No |
Search
- Description
FRAM Ultra Synthetic® oil filters are engineered for drivers who are looking for ultimate performance and engine protection. Its dual-layered synthetic blend media provides 99%+ filtering efficiency and protects up to 20,000 miles (32,000 kilometers). The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter. FRAM Ultra Synthetic is equipped with SureGrip® technology that provides a non-slip surface allowing for easy install and removal.
- Proven protection for up to 20,000 miles (32,000 kilometers)
- SureGrip® technology for easy install and removal
- Silicone anti-drain back valve helps ensure safe engine start up
- Dual-layered synthetic blend media provides 99%+ filtration efficiency*
- Optimized for synthetic motor oil
*FRAM Group testing of average filter efficiency of XG8A, XG3387A and XG4967 under ISO 4548-12 for particles greater than 20 microns.
**FRAM Group mulitpass testing of representative sampling of average filter capacity of comparable competitive retail products based on ISO4548-12 for XG8A and XG3387A.
***Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.
+ FRAM Group testing per USCAR-36 Low Temperature Leakage test after hot oil, when compared to standard nitrile gasket.
?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 2025 BUICK ENCLAVE L4-2.5L 25-20 BUICK ENCORE GX L3-1.3L 25-21 BUICK ENVISION L4-2.0L 25-20 CADILLAC CT4 L4-2.0L 25-20 CADILLAC CT4 L4-2.7L 25-20 CADILLAC CT5 L4-2.0L 2019 CADILLAC CT6 L4-2.0L 24-21 CADILLAC ESCALADE L6-3.0L 24-21 CADILLAC ESCALADE ESV L6-3.0L 25-19 CADILLAC XT4 L4-2.0L 25-20 CADILLAC XT5 L4-2.0L 25-21 CADILLAC XT6 L4-2.0L 25-20 CHEVROLET BLAZER L4-2.0L 25-23 CHEVROLET COLORADO L4-2.7L 25-19 CHEVROLET SILVERADO 1500 L4-2.7L 25-20 CHEVROLET SILVERADO 1500 L6-3.0L 2022 CHEVROLET SILVERADO 1500 LTD L4-2.7L 2022 CHEVROLET SILVERADO 1500 LTD L6-3.0L 25-21 CHEVROLET SUBURBAN L6-3.0L 25-21 CHEVROLET TAHOE L6-3.0L 25-21 CHEVROLET TRAILBLAZER L3-1.3L 25-24 CHEVROLET TRAVERSE L4-2.5L 23-20 GMC ACADIA L4-2.0L 25-24 GMC ACADIA L4-2.5L 25-23 GMC CANYON L4-2.7L 25-19 GMC SIERRA 1500 L4-2.7L 25-20 GMC SIERRA 1500 L6-3.0L 2022 GMC SIERRA 1500 LIMITED L4-2.7L 2022 GMC SIERRA 1500 LIMITED L6-3.0L 25-21 GMC YUKON L6-3.0L 25-21 GMC YUKON XL L6-3.0L - Comparison
COMPETITOR NAME COMPETITOR PART # ACDelco PF66 Carquest Premium Filters 95146 Champ PH10066 FRAM Tough Guard TG12447 FRAM Ultra Synthetic XG12447 General Motors 55495105 General Motors 12727115 K&N HP-1021 LUBER-FINER PH10066 Mighty Distributing System M9510SP Mobil PH10066 Motomaster OE Plus MOPH12447 NAPA Gold Filters 100351 Parts Master WL610351 Premium Guard PG99495 Purolator L11424 Service Champ OF1424 STP Filters S45008XL STP Filters S45008 Valvoline VO-202 Warner WPH10066 Warner Filters WPH10066 Wix WL10351 - Installation
- Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot.
- Place a drain pan under the oil filter and unscrew oil filter.
- Clean mounting base making sure the O-ring from the old filter is not stuck to the filter mount.
- Apply film of clean oil to filter gasket. Do not use grease.
- Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers.
- Check owner’s manual for correct oil specification viscosity and amount.
- Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
- Shut off engine and recheck oil level after 5 minutes and top off as necessary.