Back To Search Results

FRAM Synthetic Endurance™ Oil Filter

SKU
FE11955
More Information
Height (Inch) 5.354
Outer Diameter Top (Inch) 1.949
Anti-Drain Back Valve No
Bypass Relief Valve No
Filter Media Material Synthetic
Inside Diameter Bottom (Inch) 0.854
O-Ring (1) Inside Diameter (Inch) 0.276
O-Ring (1) Outside Diameter (Inch) 0.422
O-Ring (1) Thickness (Inch) 0.146
O-Ring Inside Diameter (Inch) 2.244
O-Ring Outside Diameter (Inch) 2.362
O-Ring Thickness (Inch) 0.118
O-Rings Included Yes
Outer Diameter Bottom (Inch) 1.949
Top Inside Diameter (Inch) 0.854
Torque Nut No
Where To Shop
Search
  • Description

    FRAM Synthetic Endurance™ premium oil filters are designed to provide extended durability and performance. Its fully synthetic filtration media delivers 99% filtration efficiency and maximum engine protection for up to 25,000 miles (40,000 kilometers) when paired with the appropriate synthetic or high-mileage motor oil. FRAM Synthetic Endurance™ was specially developed for use in modern vehicles and features heavier steel construction for today's higher flow engines.

    • Provides maximum protection and performance for up to 25,000 miles (40,000 kilometers).
    • Optimized for use with synthetic or high mileage oil.
    • Heavy-duty shell and wire screen back synthetic filter media provides maximum durability.
    • Designed with a fully synthetic filter media for 99% filtration efficiency.
    • 360° Textured Grip provides non-slip surface for easier installation and removal.
    • Perfect Seal® No-Stick Gasket provides extended durability.
    • 1 Provides up to 25,000 miles/40,000 km of protection when used with an appropriate synthetic oil. Follow recommended change intervals as outlined in your owner’s manual.

      *FRAM Group testing of average filter efficiency of FE8A, FE3387A and FE4967 or equivalent FRAM TG or EG models under ISO 4548-12 for particles greater than 20 microns.

      **FRAM Group mulitpass testing of representative sampling of average filter capacity of comparable competitive retail products based on ISO4548-12 for FE8A and FE3387A.

      ***Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.

      + FRAM Group testing per USCAR-36 Low Temperature Leakage test after hot oil, when compared to standard nitrile gasket.

      ꝉ Not all features are available on every part number in the product line. Check the package for specific features of individual filters.

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    25-21 FORD BRONCO V6-2.7L
    25-22 FORD BRONCO V6-3.0L
    24-15 FORD EDGE V6-2.7L
    25-20 FORD EXPLORER V6-3.0L
    25-15 FORD F-150 V6-2.7L
    19-17 FORD FUSION V6-2.7L
    20-16 FORD MUSTANG V8-5.2L
    25-20 FORD POLICE INTERCEPTOR UTILITY V6-3.0L
    25-24 FORD RANGER V6-2.7L
    25-24 FORD RANGER V6-3.0L
    25-20 LINCOLN AVIATOR V6-3.0L
    20-17 LINCOLN CONTINENTAL V6-2.7L
    20-17 LINCOLN CONTINENTAL V6-3.0L
    18-16 LINCOLN MKX V6-2.7L
    20-17 LINCOLN MKZ V6-3.0L
    23-19 LINCOLN NAUTILUS V6-2.7L
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    Carquest 94103
    Champ P2062
    Defense Filters DL11955
    ECOGARD X10387
    Ford KU2Z-6731-A
    Ford FT4E-6714-AA
    Ford FT4Z-6731-A
    Ford KU2J-6731-AA
    FRAM Core COR11955ACC
    FRAM Drive FD11955
    FRAM Force FF11955
    FRAM Synthetic Endurance FE11955
    FRAM Titanium FS11955
    FRAM Tough Guard TG11955
    FRAM Ultra Synthetic XG11955
    K&N HP-7037
    LUBER-FINER P2062
    MicroGard MGL10050
    Mighty Distributing System M9015
    Mobil 1 M1C-351A
    Motorcraft FL-2062
    Motorcraft FL-2062A
    NAPA 100050
    NAPA ProSelect Filters 2100050
    Parts Master WL610050
    Parts Master WL610050X
    Pennzoil PZ190
    Performax PO-190
    Premium Guard PG8154
    PUREPRO PL8154
    PureZone 8-10050
    Purolator L38154
    Quaker State QS190
    Service Champ CF8154
    Service Champ P2062
    STP S11995XL
    STP S11955
    STP Filters S11955
    STP Filters S11955XL
    Tough Guard TG11955
    Valvoline VO-115
    Warner WP2062
    Warner Filters WP2062
    Wix WL10050
  • Installation
    1. Remove drain plug from housing cap if present and allow oil to drain from cap. Remove housing cap, old gaskets/O-Rings, and filter element. Discard the used filter element and gaskets/O-Rings in the proper manner.
    2. Clean filter housing components and apply a light coating of clean engine oil to the new provided gaskets/O-Rings. Install, being careful to avoid damage to the gaskets/O-Rings. Avoid twisting of the gaskets/O-Rings.
    3. Install new filter element into the housing cap. Reinstall the housing cap and tighten to the proper installation torque as listed on the housing cap or in the service manual. Reinstall the housing cap drain if present to the proper installation torque.