Oil Filter

FRAM FORCE oil filter is engineered to provide advanced protection for all drivers that experience extreme driving conditions.

Shop Now

Advance Auto Parts Logo

Product Image Product Image

Drivers who push their vehicles to the limit in harsh weather conditions, hauling and towing, or stop and go traffic, will find the FRAM Force™ oil filter to be the ideal solution at the perfect price. Engineered for all oil types, the FRAM Force™ oil filter easily installed to deliver advanced protection and superior performance for up to 15,000 miles.

Rough non-slip textured surface coats the exterior of the oil filter allowing for easy install and removal.

Precision coil spring with glass-fiber-reinforced nylon poppet provides consistent oil flow even in cold conditions.

Stronger, more durable media provides an outstanding 98%+ dirt-trapping efficiency.*

Synthetic media blend with 20% more pleats increases dirt-trapping and dirt-holding capacity for higher levels of engine protection and longer filter life.

Silicon anti-drainback valve delivers superior start-up engine protection with up to 3X the hot oil resistance.**

Internally lubricated sealing nitrile gasket for easier filter removal.

Product Overview

Installation Instructions

  1. Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot.
  2. Place a drain pan under the oil filter and unscrew oil filter.
  3. Clean mounting base, making sure the O-ring from the old filter is not stuck to the filter mount.
  4. Apply film of clean oil to filter gasket. Do not use grease.
  5. Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers.
  6. Check owner’s manual for correct oil specification, viscosity and amount.
  7. Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
  8. Shut off engine and recheck oil level after 5 minutes and top off as necessary.

*FRAM Group testing of average filter efficiency of 8A, 3387A and 4967 or equivalent FRAM Force models under ISO 4548-12 for particles greater than 20 microns.

**Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.