FRAM Drive™

Oil Filter

FRAM Drive™ is the perfect oil filter for everyday drivers. Compatible with both conventional and synthetic oil types, FRAM Drive™ provides engine protection for up to 7,500 miles.

Shop Now

Advanced Auto Parts

Product Image Product Image

Technology

 

 

Installation Instructions

  1. Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot.
  2. Place a drain pan under the oil filter and unscrew oil filter.
  3. Clean mounting base, making sure the O-ring from the old filter is not stuck to the filter mount.
  4. Apply film of clean oil to filter gasket. Do not use grease.
  5. Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers.
  6. Check owner’s manual for correct oil specification, viscosity and amount.
  7. Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
  8. Shut off engine and recheck oil level after 5 minutes and top off as necessary.

*FRAM Group testing of filter performance of FD8A and FD7317 under ISO4548- 12

Parts Search

To find this product or any other part in our catalog, click the button below.

FIND YOUR PART

Upgrade Your Product