FRAM Extra Guard® Oil Filter
| Height (Inch) | 2.625 |
|---|---|
| Outside Diameter (Inch) | 2.690 |
| Anti-Drain Back Valve | Yes |
| Bypass Relief Valve | Yes |
| Gasket Inside Diameter (Inch) | 2.210 |
| Gasket Outside Diameter (Inch) | 2.480 |
| Gasket Thickness (Inch) | 0.205 |
| Gasket Type | Base |
| Attachment Type | Spin-On |
| Bypass Relief Valve Setting (Pounds per Square Inch) | 16-28 |
| Filter Media Material | Cellulose/Synthetic Blend |
| Inlet Type | Threaded |
| Inside Thread Diameter (Millimeter) | M20x1.5 |
| Thread Size | Metric |
| Torque Nut | No |
Search
- Description
FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Equipped with SureGrip® technology, FRAM Extra Guard® oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 10,000 miles (16,000 kilometers).
- Proven protection for up to 10,000 miles (16,000 kilometers)
- Engineered for use with synthetic or conventional motor oils
- SureGrip® technology for easy install and removal
- Filter media is a blend of fiber and resin that captures 95% of the dirt particles
- Silicone anti-drain back valve helps ensure safe engine start up
*FRAM Group testing of average filter efficiency of PH8A, PH3387A and PH4967 under ISO 4548-12 for particles greater than 20 microns.
**Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.
?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 2005 SAAB 9-2X H4-2.0L 06-05 SAAB 9-2X H4-2.5L 06-04 SUBARU BAJA H4-2.5L 10-04 SUBARU FORESTER H4-2.5L 2005 SUBARU IMPREZA H4-2.0L 12-04 SUBARU IMPREZA H4-2.5L 12-05 SUBARU LEGACY H4-2.5L 12-05 SUBARU OUTBACK H4-2.5L 16-13 SUBARU WRX STI H4-2.5L - Comparison
COMPETITOR NAME COMPETITOR PART # Carquest R84712 Carquest Premium Filters 84712 Castrol CAS6607 Certified CPH9715 Champ PH2876 Champion COS9715 Champion 47712T Champion Filters COS9715 Champion Filters 47712T Defense Filters DL6607 FERGUSON R1365 FRAM Pro FP6607BP FVP R1365 Installer Edge ML6607 LUBER-FINER PH2876 MAHLE OC711 Mann-Filter W67/1 MicroGard MGL57712 Mobil 1 M1-108 Mobil 1 M1-108A MotoMaster MPH9715 NAPA ProSelect Filters 27712 NAPA ProSelect Filters 27712MP Parts Master 67712BP Parts Master 67712 Pennzoil PZ-37 Performax PO-37 Prime Guard Filters - Archived POF4615 PureZone 8-57712 Purolator L14615 Purolator BOSS PBL14615 Purolator PureONE PL14615 Purolator PureONE PL14622 Purolator TECH TL14615 PurolatorONE PL14615 PurolatorONE PL14622 Saab 32 00 5769 STP S6607 STP Filters S6607 Subaru 15208-AA09A Subaru SCI530009 Subaru 15208-AA160 Subaru 15208-AA080 Subaru 15208-AA12A Subaru 15208-AA100 Valvoline VO-106 Valvoline VO-113BP Valvoline VO-113 Valvoline VO-106BP Wix 57712XP Wix 57712 - Installation
- Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot.
- Place a drain pan under the oil filter and unscrew oil filter.
- Clean mounting base making sure the O-ring from the old filter is not stuck to the filter mount.
- Apply film of clean oil to filter gasket. Do not use grease.
- Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers.
- Check owner’s manual for correct oil specification viscosity and amount.
- Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
- Shut off engine and recheck oil level after 5 minutes and top off as necessary.