FRAM Ultra Synthetic® Oil Filter
| Height (Inch) | 2.738 |
|---|---|
| Outer Diameter Top (Inch) | 2.561 |
| Anti-Drain Back Valve | No |
| Bypass Relief Valve | No |
| Filter Media Material | Synthetic |
| Inside Diameter Bottom (Inch) | 0.937 |
| O-Ring (1) Inside Diameter (Inch) | 0.473 |
| O-Ring (1) Outside Diameter (Inch) | 0.587 |
| O-Ring (1) Thickness (Inch) | 0.055 |
| O-Rings Included | Yes |
| Outer Diameter Bottom (Inch) | 2.561 |
| Top Inside Diameter (Inch) | 0.937 |
Search
- Description
FRAM Ultra Synthetic® oil filters are engineered for drivers who are looking for ultimate performance and engine protection. Its dual-layered synthetic blend media provides 99%+ filtering efficiency and protects up to 20,000 miles (32,000 kilometers).
- Proven protection for up to 20,000 miles (32,000 kilometers)
- Synthetic blend media provides 99%+ filtration efficiency*
- Optimized for synthetic motor oil
- Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today’s engines
*FRAM Group testing of average filter efficiency of XG8A, XG3387A and XG4967 under ISO 4548-12 for particles greater than 20 microns.
**FRAM Group mulitpass testing of representative sampling of average filter capacity of comparable competitive retail products based on ISO4548-12 for XG8A and XG3387A.
***Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.
+ FRAM Group testing per USCAR-36 Low Temperature Leakage test after hot oil, when compared to standard nitrile gasket.
?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 57-56 METROPOLITAN SERIES B L4-1.2L 15-07 MINI COOPER L4-1.6L 16-11 MINI COOPER COUNTRYMAN L4-1.6L 16-13 MINI COOPER PACEMAN L4-1.6L - Comparison
COMPETITOR NAME COMPETITOR PART # Baldwin P7450 Beck/Arnley 041-0820 BMW 11 42 7 622 446 BMW 11 42 7 557 012 Carquest 84512 Carquest R84512 Carquest Premium Filters 84512 Champ P978 Champion COC10066 Champion Filters COC10066 Citroen 1109X4 Citroen 1109Z2 ECOGARD X5830 FERGUSON G7512 Firestone P978 Ford 1303476 Ford 3M5Q-6744-AA Forecast OF62 FRAM Drive FD10066 FRAM Tough Guard TG10066 FRAM Ultra Synthetic XG10066 FVP G7512 Hastings LF631 Jaguar C2S 29685 Land Rover LR001247 LUBER-FINER P978 Magneti Marelli 1AMFL00023 MAHLE OX555 Mann-Filter HU711/5X Mann-Filter HU711/51X MicroGard MGL57512 Mobil P978 NAPA 7512 Parts Master 67512 Pennzoil PZ183 Performax PO-183 Peugeot 1109X3 Peugeot 1109Z1 Premium Guard PG5830 PureZone 8-57512 Purflux L358 Purflux L358A Purflux L372 Purolator L15830 Service Champ CF5830 STP S10066 STP Filters S10066 STP Filters S10066XL Valvoline VO-111 Volvo 30650798 Warner WP978 Warner Filters WP978 Wix 57512 - Installation
- Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot.
- Place a drain pan under the oil filter and unscrew oil filter.
- Clean mounting base making sure the O-ring from the old filter is not stuck to the filter mount.
- Apply film of clean oil to filter gasket. Do not use grease.
- Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers.
- Check owner’s manual for correct oil specification viscosity and amount.
- Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
- Shut off engine and recheck oil level after 5 minutes and top off as necessary.