Back To Search Results

FRAM Oil Filter

SKU
CH6005
More Information
Height (Inch) 2.234
Outer Diameter Top (Inch) 2.172
Anti-Drain Back Valve No
Bypass Relief Valve Yes
Bypass Relief Valve Setting (Pounds per Square Inch) 8-10
Filter Media Material Cellulose/Synthetic Blend
Inside Diameter Bottom (Inch) 0.734
O-Ring Inside Diameter (Inch) 2.484
O-Ring Outside Diameter (Inch) 2.781
O-Ring Thickness (Inch) 0.140
O-Rings Included Yes
Outer Diameter Bottom (Inch) 2.172
Top Inside Diameter (Inch) 0.734
Torque Nut No
More Information
Where To Shop
Search
  • Description

    FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Engineered for conventional and synthetic motor oil, Extra Guard offers proven engine protection for up to 10,000 miles (16,000 kilometers).

    • Proven protection for up to 10,000 miles (16,000 kilometers)
    • Engineered for use with synthetic or conventional motor oils
    • Filter media is a blend of fiber and resin that captures 95%?of the dirt particles
    • The perfect balance of dirt-trapping efficiency and dirt-holding capacity
    • Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today’s engines

    *FRAM Group testing of average filter efficiency of PH8A, PH3387A and PH4967 under ISO 4548-12 for particles greater than 20 microns.

    **Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.

    ?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    2007 APRILIA PEGASO 650 All
    2007 APRILIA PEGASO 650 FACTORY All
    07-06 APRILIA PEGASO 650 TRAIL All
    88-87 YAMAHA BW350 All
    82-80 YAMAHA SR250 All
    81-78 YAMAHA SR500 All
    1986 YAMAHA SRX600 All
    93-92 YAMAHA TDM850 All
    82-80 YAMAHA TT250 All
    81-76 YAMAHA TT500 All
    86-83 YAMAHA TT600 All
    85-83 YAMAHA XC180 RIVA 180 All
    91-87 YAMAHA XC200 RIVA All
    83-80 YAMAHA XT250 All
    81-76 YAMAHA XT500 All
    83-82 YAMAHA XT550 All
    95-84 YAMAHA XT600 All
    22-08 YAMAHA XV250 V STAR 250 All
    07-95 YAMAHA XV250 VIRAGO All
    1983 YAMAHA XV500 VIRAGO All
    00-90 YAMAHA XV535 VIRAGO All
    88-87 YAMAHA XV535 VIRAGO All
    83-82 YAMAHA XZ550R VISION All
    01-98 YAMAHA YFM600FW GRIZZLY 4X4 All
    18-13 YAMAHA YFM700 RAPTOR All
    09-06 YAMAHA YFM700R RAPTOR All
    18-11 YAMAHA YFM700R RAPTOR All
    15-07 YAMAHA YFM700R RAPTOR SE All
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    Aprilia AP8520017
    Big A 96935
    Big A 96936
    Carquest 89936
    Champ P7005
    Emgo 10-29100
    Emgo 10-79100
    Hastings LF591
    HiFlo HF145
    K&N KN-145
    LUBER-FINER P7005
    Master Parts P-305
    NAPA 4935
    NAPA 4936
    Purolator ML16804
    Purolator ML16805
    STP P7005
    Warner P7005
    Wix 24936
    Yamaha 4X7-13440-90
    Yamaha 5JX-13440-00-00
    Yamaha 4X7-13440-01
    Yamaha 2H0-13440-90
  • Installation
    1. Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot.
    2. Place a drain pan under the oil filter and unscrew oil filter.
    3. Clean mounting base making sure the O-ring from the old filter is not stuck to the filter mount.
    4. Apply film of clean oil to filter gasket. Do not use grease.
    5. Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers.
    6. Check owner’s manual for correct oil specification viscosity and amount.
    7. Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
    8. Shut off engine and recheck oil level after 5 minutes and top off as necessary.